Crossmember 3 x 3 84" V Alum

The Crossmember 3 x 3 84" V Alum is an 84-inch aluminum V-shaped crossmember made from 3x3-inch square tubing for Magic Tilt boat trailers, available at Skipper B Trailers in Westwego, Louisiana. This is the structural crossbar that spans the width of the trailer frame and supports the bunk boards at the correct V-angle to match the hull shape of the boat. The V-bend at the center creates the angled bunk support that cradles a V-hull boat properly — the bunks follow the V-shape of the hull from keel to chine, distributing the boat's weight evenly across the bunk surface instead of concentrating it at a flat contact point. The 84-inch (7-foot) length spans the frame width on wider Magic Tilt trailers carrying larger boats, and the 3x3-inch aluminum tubing provides the structural strength to support the hull weight without the corrosion penalty of steel.

Louisiana boaters running larger V-hull boats on Magic Tilt trailers depend on the crossmembers to hold the bunks at the correct angle for proper hull support. A crossmember that's bent from overload, corroded from years of saltwater launches at Bayou Segnette State Park, Lake Pontchartrain, and the ramps across Jefferson Parish and the Greater New Orleans West Bank, or cracked from fatigue changes the bunk angle and creates improper hull contact. Bunks that don't match the hull angle create pressure points that dent, stress, and damage the hull over thousands of miles on Interstate 10, Highway 90, the Westbank Expressway, and the rough roads between Westwego, Marrero, Harvey, and Gretna. The aluminum construction on this crossmember provides a critical advantage in Louisiana's corrosive environment — aluminum doesn't rust like steel, won't develop the iron oxide bleeding that stains hulls, and maintains its structural integrity through years of saltwater submersion. The 3x3-inch tube size provides the rigidity needed to support the full hull weight of larger boats without flexing under load. Whether you're Captain Chris replacing a damaged crossmember on a large fleet trailer, Fishing Fanatic Frank upgrading from a corroded steel crossmember to aluminum, a marine repair shop stocking Magic Tilt aluminum crossmembers for larger trailer service in Greater New Orleans, or any boater restoring proper bunk support on a wider Magic Tilt, this aluminum V crossmember provides the corrosion-resistant structural support.

At $207.00, this aluminum crossmember provides corrosion-resistant hull support for wider Magic Tilt trailers. The 84-inch length spans wider frame configurations, and the 3x3-inch aluminum tube provides the strength to support larger boat weights. The V-bend angle matches standard Magic Tilt hull support geometry. Perfect for crossmember replacement, aluminum upgrades, bunk support restoration, and Magic Tilt service on wider boat trailers throughout Southeast Louisiana.

Key Features:
- 84-inch aluminum V-shaped crossmember — 3x3-inch square tubing
- Pre-bent V-angle matches hull shape for proper bunk support
- 7-foot span for wider Magic Tilt trailer frame configurations
- Aluminum construction — won't rust or corrode in saltwater
- 3x3-inch tube provides structural rigidity for larger boat weights
- Supports bunk boards at correct angle to cradle V-hull boats
- Distributes hull weight evenly across bunk surface
- No iron oxide rust bleed to stain boat hull finish
- Replaces bent, corroded, or cracked crossmembers
- Maintains proper bunk angle for hull protection
- Lighter than steel equivalent — reduces trailer weight
- Compatible with Magic Tilt wider boat trailer frames
- Same-day pickup available in Westwego, LA

Aluminum V-crossmember for Southeast Louisiana Magic Tilt wider boat trailer bunk support. Available for same-day pickup in Westwego, LA.