Jack, 12K Front Pin, SW

The Jack, 12K Front Pin, SW is a 12,000 lb side-wind tongue jack with front pin mount and crank handle, manufactured by Tex Trail Trailer Parts, available at Skipper B Trailers in Westwego, Louisiana. This is the heavy-duty tongue jack for the largest and heaviest trailers at Skipper B — the 12,000 lb capacity handles the tongue weight on heavy tandem and triple axle boat trailers, dump trailers, equipment trailers, car haulers, and commercial haulers where tongue weight alone can reach 1,000-2,000 lbs or more. The side-wind design places the crank handle on the side of the jack for ergonomic cranking from a standing position beside the trailer tongue — the operator doesn't have to reach over or around the coupler to crank. The front pin mount drops into a receiver tube on the trailer tongue for a solid, removable connection, and the included handle makes cranking manageable even under the heaviest tongue loads.

Louisiana operators towing the heaviest trailers across Interstate 10, Highway 90, the Westbank Expressway, and the routes between Westwego, Marrero, Harvey, Gretna, and job sites throughout Jefferson Parish and Greater New Orleans need a tongue jack that lifts the heaviest tongue weights without straining the gears, bending the tube, or collapsing under the load. A heavy tandem axle boat trailer carrying a large offshore center console, a loaded dump trailer with material in the bed, or a car hauler with a vehicle on the deck puts enormous weight on the tongue jack during hitching and unhitching. A standard 2,000 or 5,000 lb jack under these tongue weights strips gears, bends tubes, and fails — leaving the trailer tongue on the ground. The 12,000 lb jack handles these extreme tongue weights with the structural capacity and gearing ratio designed for the load. The side-wind position keeps the operator's hands and arms clear of the coupler and ball during cranking, and the front pin mount provides quick installation and removal from the tongue receiver. Whether you're Captain Chris equipping heavy fleet trailers with jacks that match the tongue weight, a contractor upgrading the jack on a heavy dump or equipment trailer, a car hauler operator needing maximum jack capacity, or any operator towing the heaviest trailers, this 12K Tex Trail delivers.

At $199.99, this 12,000 lb side-wind jack provides maximum tongue jack capacity from Tex Trail Trailer Parts. Front pin mount for quick installation into tongue receiver tubes. Side-wind crank with handle for ergonomic heavy-load cranking. Perfect for heavy boat trailers, dump trailers, equipment trailers, car haulers, and any trailer with heavy tongue weight throughout Southeast Louisiana.

Key Features:
- 12,000 lb side-wind tongue jack with front pin mount
- Maximum capacity for the heaviest trailer tongue weights
- Side-wind crank — ergonomic standing operation beside the tongue
- Front pin drops into tongue receiver tube for solid connection
- Crank handle included for manageable heavy-load cranking
- 12K capacity handles 1,000-2,000+ lb tongue weights
- Won't strip gears or bend under heavy loads
- Removable via front pin for transport or storage
- For heavy boat trailers, dump, equipment, and car haulers
- Tex Trail Trailer Parts — heavy-duty towing hardware
- Replaces undersized jacks that fail under heavy tongue weight
- Heavy-duty construction throughout at $199.99
- Same-day pickup available in Westwego, LA

12,000 lb side-wind tongue jack for Southeast Louisiana heavy trailer hitching. Available for same-day pickup in Westwego, LA.