Nut Zinc for Brakes 3/8

The Nut Zinc for Brakes 3/8 is a 3/8-inch zinc-plated hex nut for securing the brake backing plate to the trailer axle flange, available at Skipper B Trailers in Westwego, Louisiana. This small fastener holds the brake backing plate — the steel plate that supports the brake shoes, springs, and hardware — against the axle mounting flange. Every brake component on the drum assembly is mounted to or supported by the backing plate, and the backing plate is held in position by these nuts. A missing or failed backing plate nut allows the brake assembly to shift on the axle, causing uneven braking, brake shoe contact problems, and the grinding and scraping sounds that indicate brake components are moving out of position during towing on Interstate 10, Highway 90, the Westbank Expressway, and the roads between Westwego, Marrero, Harvey, and Gretna.

Louisiana trailer owners who service their own drum brakes or have them serviced at a shop occasionally find backing plate nuts that are corroded, stripped, or missing after years of saltwater exposure at the launches across Bayou Segnette State Park, Lake Pontchartrain, and the ramps throughout Jefferson Parish and the Greater New Orleans West Bank. The zinc plating on this nut provides corrosion resistance, but even zinc-plated hardware eventually corrodes in the saltwater submersion cycle that boat trailer brakes experience. When servicing brakes, inspect every backing plate nut — if any are corroded thin, stripped, or missing, replace them. At $0.40 each, there's no reason to reuse questionable fasteners on the brake assembly. Whether you're Fishing Fanatic Frank replacing backing plate nuts during a brake job, a marine repair shop stocking brake hardware for customer service in Greater New Orleans, Captain Chris ensuring fleet trailers have complete brake mounting hardware, or any DIY trailer owner servicing drum brakes, this zinc nut completes the assembly.

At $0.40, this is one of the cheapest parts on the trailer and one of the most critical for brake function. Always inspect and replace backing plate nuts during any brake service. The 3/8-inch size fits standard trailer drum brake backing plate bolts. Buy a handful — you'll need multiple per backing plate, and extras cost almost nothing. Perfect for brake service, backing plate mounting, brake hardware replacement, and drum brake maintenance throughout Southeast Louisiana.

Key Features:
- 3/8-inch zinc-plated hex nut for brake backing plate mounting
- Secures brake backing plate to axle mounting flange
- Zinc plating for corrosion resistance
- Holds the entire drum brake assembly in position
- Replace any corroded, stripped, or missing backing plate nuts
- Inspect and replace during every brake service
- $0.40 each — no reason to reuse questionable hardware
- Buy extras — multiple needed per backing plate
- Critical fastener for proper brake assembly alignment
- Standard 3/8-inch size fits common trailer brake configurations
- Essential for drum brake service and brake hardware replacement
- Ideal for DIY brake jobs, marine repair shops, and fleet service
- Same-day pickup available in Westwego, LA

Zinc-plated brake backing plate nut for Southeast Louisiana trailer drum brake service. Available for same-day pickup in Westwego, LA.