Stud for 7K Drum (BD-865-17)

The Stud for 7K Drum (BD-865-17) is a press-in wheel stud for 7,000 lb TRP (Trailer Parts Pro) brake drum hubs, part number BD-865-17, available at Skipper B Trailers in Westwego, Louisiana. This is the heavy-duty wheel stud for the larger drum brake hubs found on 7,000 lb trailer axles — the heavier axle capacity used on tandem axle boat trailers carrying large offshore boats, heavy utility trailers, enclosed cargo trailers, and equipment trailers. The stud presses into the brake drum flange from the back side and the threaded shaft accepts the lug nut to hold the wheel on the hub. At 7,000 lb axle capacity, these studs carry significantly more load per wheel than lighter axle studs, and the heavier shear and tension forces demand the correct stud specification.

Louisiana trailer owners running heavy axles with 7K drum brakes — the tandem axle boat trailers towing large center consoles and offshore rigs from the launches at Bayou Segnette State Park, Lake Pontchartrain, and across Jefferson Parish, the heavy utility and cargo trailers hauling loaded commercial cargo on Interstate 10, Highway 90, the Westbank Expressway, and the roads between Westwego, Marrero, Harvey, and Gretna — need every wheel stud present and in good condition. A sheared stud on a heavy trailer wheel is more dangerous than on a lighter trailer because the remaining studs are already under higher load. A 7K axle running on four studs instead of five under full load puts extreme stress on the remaining fasteners and accelerates the next failure. Whether you're Fishing Fanatic Frank replacing a sheared stud on his heavy tandem axle boat trailer, Captain Chris replacing corroded studs across fleet heavy trailer drum brakes, a marine repair shop stocking the correct 7K drum stud for customer service in Greater New Orleans, or any heavy trailer owner who needs the right stud for the 7K TRP drum, this BD-865-17 is the exact part.

At $3.49 each, this wheel stud is one of the cheapest and most critical fasteners on a heavy trailer. Never run a hub with a missing or broken stud — replace immediately. The BD-865-17 fits 7,000 lb TRP brake drum hubs specifically. Verify the part number matches your drum before ordering. Buy extras to keep on hand for quick replacements. Perfect for wheel stud replacement, drum brake service, tire changes, and heavy-duty trailer maintenance throughout Southeast Louisiana.

Key Features:
- Press-in wheel stud for 7,000 lb TRP brake drum hubs
- Part number BD-865-17 — specific to 7K TRP drums
- Heavy-duty stud for higher-load axle applications
- Threaded shaft accepts standard lug nut
- Knurled press-in base grips drum flange securely
- Replaces sheared, stripped, or corroded wheel studs
- Critical fastener on heavy trailer wheels — never run with missing studs
- Press-in installation from the back side of the drum flange
- Affordable at $3.49 — buy extras and keep spares on hand
- Verify BD-865-17 matches your specific drum hub
- Essential for heavy trailer wheel service and drum brake maintenance
- Ideal for marine repair shops, fleet maintenance, and DIY service
- Same-day pickup available in Westwego, LA

Heavy-duty 7K drum wheel stud for Southeast Louisiana heavy trailer service. Available for same-day pickup in Westwego, LA.