Assy 3/8" x 3" Galv B/L/F/N

The Assy 3/8" x 3" Galv B/L/F/N is a complete galvanized bolt assembly — 3/8-inch diameter by 3-inch length — including bolt, lock washer, flat washer, and nut, manufactured by Best Bolt & Nut Corp., available at Skipper B Trailers in Westwego, Louisiana. The 3-inch length is the workhorse of the longer bolt range — the most commonly needed length beyond the standard 1-2 inch fasteners for connections that pass through a single frame member with room for washers and nut engagement on the other side. Bunk board mounting through standard crossmembers, bracket connections through single-layer frame rails, light bracket mounting through fender panels, and the everyday bolted joints that trailer maintenance and repair demand most frequently all land in the 3-inch range.

Louisiana trailer owners replacing hardware during routine maintenance reach for the 3-inch bolt more than any other longer length. It's the bolt that handles the standard through-frame connections without the excess length of 4, 5, and 6-inch bolts. A 3-inch bolt through a standard trailer crossmember leaves the correct 2-3 threads past the nut after torquing — full engagement without excess shank hanging past the nut to snag on wiring, interfere with adjacent components, or catch debris during towing on Interstate 10, Highway 90, the Westbank Expressway, and the roads between Westwego, Marrero, Harvey, and Gretna. The galvanized finish resists the corrosion from saltwater and brackish water launches at Bayou Segnette State Park, Lake Pontchartrain, and the ramps across Jefferson Parish and the Greater New Orleans West Bank. The complete B/L/F/N assembly means the flat washer, lock washer, and nut are matched and ready — grab one assembly per bolt needed and the job goes together without sorting through mixed hardware bins. Whether you're Fishing Fanatic Frank re-bolting bunk boards on his Magic Tilt, a marine repair shop stocking the most-used bolt length for customer service in Greater New Orleans, New Boater Nancy and Nick replacing corroded bolts on a used trailer, or any trailer owner doing hardware maintenance, the 3-inch assembly is the bolt you'll use most.

At $2.79, this complete galvanized assembly provides the most commonly needed longer bolt length with all hardware included. Part of Skipper B's full range of 3/8-inch galvanized assemblies from 1.5" to 6". Perfect for bunk mounting, bracket connections, light brackets, through-frame fastening, and the most common trailer bolt applications throughout Southeast Louisiana.

Key Features:
- Complete galvanized bolt assembly — 3/8" x 3" with B/L/F/N
- 3-inch length — most commonly needed longer bolt size
- Bolt, lock washer, flat washer, and nut included
- Galvanized finish for saltwater corrosion resistance
- Standard through-frame connection length
- Part of full 3/8" assembly range from 1.5" to 6" at Skipper B
- For bunks, brackets, lights, and standard frame connections
- Correct length for 2-3 threads past nut after torquing
- Best Bolt & Nut Corp. — quality fastener manufacturer
- Complete assembly — nothing else to source
- The go-to bolt length for most trailer maintenance
- Affordable complete assembly at $2.79
- Same-day pickup available in Westwego, LA

3-inch galvanized bolt assembly for Southeast Louisiana standard trailer connections. Available for same-day pickup in Westwego, LA.