Axle Only 3.5K 95" HF Straight

The Axle Only 3.5K 95" HF Straight is a 3,500 lb straight beam axle with drop-down spindles measuring 95 inches hub face to hub face, axle beam only, available at Skipper B Trailers in Westwego, Louisiana. This is the bare axle beam — the structural tube with spindles that forms the core of the axle assembly — sold without hubs, bearings, seals, or brakes, allowing you to build the complete axle with your own components or reuse serviceable parts from the old axle you're replacing. The 3,500 lb capacity is the most common single axle rating for mid-size boat trailers and utility trailers across Southeast Louisiana, and the 95-inch hub face measurement fits the standard frame widths found on many trailers in this capacity class. The straight beam with drop-down spindles provides a lower ride height than a standard straight axle, bringing the trailer deck and boat closer to the ground for easier loading and lower center of gravity during towing.

Louisiana trailer owners who need an axle replacement but have serviceable hubs, bearings, and brakes save significant money buying the axle beam only instead of a complete axle assembly. When the axle tube is bent from overload, twisted from a pothole impact on the rough parish roads between Westwego, Marrero, Harvey, and Gretna, or worn at the spring seats from years of loaded towing on Interstate 10, Highway 90, and the Westbank Expressway, the beam itself needs replacement — but the hubs, bearings, seals, and brakes mounted on it may still be perfectly serviceable. The 95-inch hub face measurement is critical — this is the distance between the mounting faces where the hubs sit, and it determines the trailer's track width. Measure your existing axle's hub face distance before ordering to confirm the 95-inch dimension matches. The drop-down spindle configuration positions the spindle below the centerline of the beam, lowering the trailer approximately 2 inches compared to a standard straight spindle — important for maintaining the correct deck height on trailers designed for the drop-down position. Whether you're a marine repair shop replacing a bent axle beam for a customer in Greater New Orleans, Fishing Fanatic Frank rebuilding his trailer's axle with serviceable hubs, Captain Chris replacing axle beams across fleet trailers using existing hub assemblies, or a DIY builder sourcing the axle for a custom trailer build, this 3.5K beam provides the foundation.

At $279.00, this axle beam provides the 3,500 lb foundation at a significant savings over a complete axle assembly. Axle beam only — hubs, bearings, seals, and brakes sold separately or reused from existing assemblies. Measure your hub face distance to confirm the 95-inch dimension. Verify straight beam with drop-down spindle matches your trailer configuration. Perfect for axle replacements, trailer rebuilds, custom builds, and axle service throughout Southeast Louisiana.

Key Features:
- 3,500 lb straight beam axle with drop-down spindles
- 95-inch hub face to hub face measurement
- Axle beam only — hubs, bearings, brakes sold separately
- Drop-down spindles lower ride height approximately 2 inches
- Most common single axle capacity for mid-size trailers
- Save money — reuse serviceable hubs and bearings from old axle
- Replaces bent, twisted, or worn axle beams
- Measure hub face distance before ordering — must match 95 inches
- Spring seats for leaf spring mounting
- Straight beam profile for standard trailer configurations
- 3,500 lb capacity handles mid-size boats and utility loads
- Ideal for marine repair shops, DIY builders, and fleet maintenance
- Same-day pickup available in Westwego, LA

3,500 lb straight beam axle for Southeast Louisiana trailer rebuilds and replacements. Available for same-day pickup in Westwego, LA.