Axle Rnd 3.5K 70" SC No Hubs

The Axle Rnd 3.5K 70" SC No Hubs is a round 3,500 lb trailer axle with a 70-inch hub face measurement and spring center mounting, sold without hubs, available at Skipper B Trailers in Westwego, Louisiana. This is the narrower version of the 3,500 lb axle — the 70-inch hub face fits the narrower frame widths found on many single axle boat trailers and compact utility trailers across the Southeast Louisiana market. The 3,500 lb rating is the most common axle capacity for single axle boat trailers and light tandem configurations found on the trailers launched at Bayou Segnette State Park, Lake Pontchartrain, and the ramps throughout Jefferson Parish and the Greater New Orleans West Bank. The hub face measurement is the critical dimension — it must match your trailer's frame width and fender spacing for correct tire clearance and tracking on Interstate 10, Highway 90, the Westbank Expressway, and throughout Greater New Orleans.

Louisiana trailer owners replacing an axle understand that getting the hub face measurement right is the first step. A 74-inch axle on a 70-inch frame puts the tires too far out — contacting the fenders, sitting beyond the frame edge, and creating a handling problem. A 70-inch axle on a 74-inch frame pulls the tires too far in — leaving excessive gap inside the fenders and potentially causing tire-to-frame interference. The 70-inch hub face on this axle fits the narrower boat trailers carrying 14-17 foot boats — the compact trailers that are most common in the recreational boating fleet between Westwego, Marrero, Harvey, and Gretna. The spring center (SC) mounting puts the welded spring seats in the standard position for spring-over-axle suspension, and the axle ships without hubs so you can transfer existing hubs or install new ones to match your wheel bolt pattern. Whether you're Fishing Fanatic Frank replacing a bent axle after a pothole impact, a marine repair shop reaxling a customer trailer with the correct narrower dimension, or a trailer builder fabricating a custom setup on a narrow-frame trailer, this 70-inch axle is the right foundation.

At $189.99, this 3,500 lb round axle at the 70-inch hub face delivers the narrower-frame specification at a price that makes axle replacement practical. Measure your existing hub face before ordering — the distance is measured from the center of one hub mounting surface to the center of the other. Hubs, bearings, and seals sold separately. Perfect for axle replacements, trailer rebuilds, custom builds, and axle upgrades on narrow-frame boat trailers and utility trailers throughout Southeast Louisiana.

Key Features:
- Round 3,500 lb trailer axle with 70-inch hub face measurement
- Spring center (SC) mounting for spring-over-axle configurations
- Narrower hub face for compact boat trailer and utility trailer frames
- Machined spindles at each end for hub mounting
- Welded spring seat plates for leaf spring attachment
- Most common axle capacity for single axle boat trailers
- Axle only — hubs, bearings, and seals sold separately
- Configure your own hub assembly to match your wheel bolt pattern
- Replaces bent, twisted, worn, or corroded trailer axles
- Measure existing hub face before ordering — 70" vs 74" are not interchangeable
- Restores proper tracking, tire wear, and braking alignment
- Ideal for DIY trailer builders, marine repair shops, and fleet maintenance
- Same-day pickup available in Westwego, LA

3,500 lb trailer axle with 70-inch hub face for Southeast Louisiana narrow-frame trailers. Available for same-day pickup in Westwego, LA.