Brake Flange, TD 2.359 Diam

The Brake Flange, TD 2.359 Diam is a Tie Down Engineering brake mounting flange with a 2.359-inch center bore diameter, available at Skipper B Trailers in Westwego, Louisiana. This flange provides the mounting surface on the trailer axle where the brake backing plate bolts on — it's the critical interface between the axle tube and the brake assembly. The 2.359-inch diameter is a precision dimension that matches a specific axle tube outer diameter in the Tie Down Engineering brake system. The flange welds or presses onto the axle at the exact position where the brake needs to mount, and the bolt holes in the flange align with the holes in the brake backing plate to create a rigid, secure brake-to-axle connection.

Louisiana trailer owners who are building axles, repairing brake mounts, or replacing damaged flanges on trailers running Tie Down Engineering brake components need the correct flange diameter to match the axle tube. A flange with the wrong bore diameter won't seat properly on the axle — too large and it wobbles, creating a misaligned brake assembly that causes uneven pad wear and reduced braking effectiveness. Too small and it won't fit over the axle tube. The 2.359-inch bore is specific to a particular Tie Down Engineering axle tube size, and using the matching flange ensures the brake backing plate mounts square to the axle for proper brake function on Interstate 10, Highway 90, the Westbank Expressway, and the roads between Westwego, Marrero, Harvey, and Gretna. A damaged flange — cracked from impact, corroded from saltwater launches at Bayou Segnette State Park, Lake Pontchartrain, and the ramps across Jefferson Parish, or warped from heat — compromises the entire brake assembly at that wheel position. Whether you're a trailer builder fabricating an axle with Tie Down Engineering brakes, a marine repair shop replacing a damaged flange during brake service in Greater New Orleans, Fishing Fanatic Frank fixing a brake mount issue on his trailer, or any operator servicing Tie Down Engineering brake components, this precision flange provides the exact bore diameter.

At $3.88, this brake flange provides the precision axle-to-brake mounting surface at a minimal cost. The 2.359-inch center bore fits specific Tie Down Engineering axle tube diameters. Verify your axle tube matches the 2.359-inch dimension before ordering. Perfect for axle fabrication, brake mount repair, flange replacement, and Tie Down Engineering brake system service throughout Southeast Louisiana.

Key Features:
- Tie Down Engineering brake mounting flange — 2.359" center bore
- Provides mounting surface for brake backing plate on axle
- Precision 2.359-inch diameter matches specific axle tube size
- Bolt holes align with brake backing plate mounting
- Welds or presses onto the axle tube
- Creates rigid brake-to-axle connection
- Replaces cracked, corroded, or warped brake flanges
- Proper alignment ensures even brake pad wear
- Verify axle tube matches 2.359-inch bore before ordering
- For axle fabrication and brake mount repair
- Tie Down Engineering — marine trailer brake components
- Affordable precision component at $3.88
- Same-day pickup available in Westwego, LA

Tie Down Engineering brake flange for Southeast Louisiana trailer axle and brake service. Available for same-day pickup in Westwego, LA.