Hub 5.2-7K 6 on 5.5 PP Kit

The Hub 5.2-7K 6 on 5.5 PP Kit is a pre-packed hub kit with a 6-lug on 5.5-inch bolt pattern for 5,200 to 7,000 lb trailer axles, available at Skipper B Trailers in Westwego, Louisiana. Pre-packed means this hub comes fully assembled with bearings, races, seal, and dust cap already installed and greased — ready to slide directly onto the axle spindle without sourcing, pressing, or packing individual components. The 6-lug on 5.5-inch bolt pattern is the heavy-duty wheel pattern found on larger tandem axle boat trailers, heavy utility trailers, enclosed cargo trailers, and equipment trailers running the 5,200-7,000 lb axle range. This is the hub for the big trailers that carry serious weight across Interstate 10, Highway 90, the Westbank Expressway, and the roads between Westwego, Marrero, Harvey, and job sites throughout Jefferson Parish and Greater New Orleans.

Louisiana trailer owners servicing heavy axles appreciate the pre-packed format because it eliminates the most time-consuming and error-prone parts of a hub replacement. Pressing races into a hub requires specific tools and technique — a race that's cocked during pressing damages the bearing seat and causes premature failure. Packing bearings with grease by hand requires getting grease fully through the roller cage — a bearing that's packed incompletely runs dry on the inside rollers and overheats. The pre-packed kit arrives with races professionally pressed, bearings professionally packed, the inner seal installed, and the dust cap fitted — all done at the factory where it's done right. Slide it on the spindle, install the castle nut and cotter pin, and the hub is ready to roll. Whether you're Captain Chris replacing hubs on heavy fleet trailers, Fishing Fanatic Frank doing a hub swap on his tandem axle boat trailer after saltwater corrosion destroyed the old hubs, a marine repair shop offering efficient hub replacement for customer trailers in Marrero, Harvey, and Greater New Orleans, or any trailer owner who wants the confidence of factory-packed bearings, this pre-packed kit delivers a complete hub ready to install.

At $62.99, this pre-packed hub kit saves time, eliminates component sourcing, and provides factory-quality bearing installation. The 6-lug on 5.5-inch bolt pattern fits the 5,200-7,000 lb axle range on heavy trailers. Pre-packed with bearings, races, seal, and dust cap — nothing else to buy, nothing else to install. Perfect for hub replacement, bearing service, axle rebuilds, and heavy-duty trailer maintenance throughout Southeast Louisiana.

Key Features:
- Pre-packed hub kit — bearings, races, seal, and dust cap installed
- 6-lug on 5.5-inch bolt pattern for heavy trailer wheels
- Fits 5,200 to 7,000 lb trailer axles
- Factory-pressed races and factory-packed bearings
- Greased and ready to slide onto the axle spindle
- Eliminates individual component sourcing and assembly
- No race pressing, bearing packing, or seal installation needed
- 6-lug pattern for heavier tandem axle and commercial trailers
- Saves significant time over building a hub from components
- Replaces corroded, damaged, or failed heavy-duty hubs
- Complete kit — nothing else to buy for installation
- Essential for heavy trailer hub replacement and bearing service
- Same-day pickup available in Westwego, LA

Pre-packed 6-lug hub kit for Southeast Louisiana heavy trailer axle service. Available for same-day pickup in Westwego, LA.