Hub Kit #405 Prepackaged 5 on 5

The Hub Kit #405 Prepackaged 5 on 5 is a pre-packaged hub kit with a 5-lug on 5-inch bolt pattern, part number 405, available at Skipper B Trailers in Westwego, Louisiana. Pre-packaged means this hub comes fully assembled with bearings, races, seal, and dust cap already installed and greased — ready to slide directly onto the axle spindle without sourcing, pressing, or packing individual components. The 5-lug on 5-inch bolt pattern is the standard wheel configuration found on 3,500 lb trailer axles — the most common axle rating across single axle boat trailers, utility trailers, and light enclosed cargo trailers in Southeast Louisiana. If your trailer runs five lug nuts per wheel on a 5-inch bolt circle, this is the hub that fits.

Louisiana trailer owners replacing a failed or corroded hub on a 3,500 lb axle appreciate the pre-packaged format because it eliminates the most time-consuming and error-prone parts of hub replacement. Pressing races into a bare hub requires a hydraulic press or careful hammer work — a cocked race damages the bearing seat and leads to premature bearing failure on the roads between Westwego, Marrero, Harvey, Gretna, and the launches across Jefferson Parish and Greater New Orleans. Packing bearings by hand requires forcing grease completely through the roller cage — incompletely packed bearings run dry on the inside rollers and overheat during highway towing on Interstate 10, Highway 90, and the Westbank Expressway. The pre-packaged kit arrives with races factory-pressed, bearings factory-packed, the inner seal installed, and the dust cap fitted. Slide it on the spindle, set the castle nut and cotter pin, and the hub is ready for the road and the ramp at Bayou Segnette State Park, Lake Pontchartrain, and every launch across the West Bank. Whether you're Fishing Fanatic Frank replacing a corroded hub on his single axle boat trailer, New Boater Nancy and Nick servicing hubs on a used trailer they just bought, a marine repair shop offering efficient hub replacement for customer trailers in Greater New Orleans, or Captain Chris maintaining fleet trailers with reliable factory-packed hubs, this pre-packaged kit delivers the complete hub ready to install.

At $62.99, this pre-packaged hub kit saves time and eliminates component sourcing for the most common trailer axle size. The 5-lug on 5-inch bolt pattern fits 3,500 lb axle wheels. Pre-packaged with bearings, races, seal, and dust cap — nothing else to buy for installation. Perfect for hub replacement, bearing service, axle rebuilds, and standard trailer maintenance throughout Southeast Louisiana.

Key Features:
- Pre-packaged hub kit #405 — bearings, races, seal, and dust cap installed
- 5-lug on 5-inch bolt pattern for standard trailer wheels
- Fits 3,500 lb trailer axles — the most common axle rating
- Factory-pressed races and factory-packed bearings
- Greased and ready to slide onto the axle spindle
- Eliminates individual component sourcing and assembly
- No race pressing, bearing packing, or seal installation needed
- Standard bolt pattern for single axle boat and utility trailers
- Saves significant time over building a hub from components
- Replaces corroded, damaged, or failed hubs
- Complete kit — nothing else to buy for installation
- Essential for standard trailer hub replacement and bearing service
- Same-day pickup available in Westwego, LA

Pre-packaged 5-lug hub kit for Southeast Louisiana standard trailer axle service. Available for same-day pickup in Westwego, LA.