Magic Tilt #69725 Mayronne

The Magic Tilt #69725 Mayronne is a Magic Tilt CD18N-2000 galvanized single axle boat trailer designed for narrow-beam boats up to 18 feet with a 2,000 lb gross vehicle weight rating, running B78x13C tires on 13-inch wheels, available now at Skipper B Trailers in Westwego, Louisiana. The CD18N is Magic Tilt's narrow-beam specialist — the "N" in the model code designates bunk spacing configured specifically for the narrower hulls that standard-width trailers don't support correctly. Jon boats, pirogues, narrow aluminum skiffs, and slim-profile fishing boats with beams narrower than standard need the bunks set closer together so the hull sits flat across the bunk surface at the correct contact points. A standard-width trailer under a narrow boat leaves the hull resting on the inner edges of the bunks, creating concentrated pressure points that stress the hull over thousands of miles of towing.

Louisiana anglers who fish from narrow-beam boats access the waters that wider boats can't — the tight bayou channels near Bayou Segnette, the shallow marsh routes through the Barataria waterways, the narrow backwater lanes throughout Jefferson Parish, and the skinny-water flats across the West Bank and Southeast Louisiana's coastal wetlands. These narrow-beam boats need a trailer that matches the hull geometry. The CD18N's bunk spacing supports the hull at the correct width, distributing the boat's weight evenly across the full bunk surface instead of concentrating it on narrow contact edges. Proper weight distribution prevents the gel coat cracking, aluminum fatigue, and hull deformation that develop over time from incorrect bunk positioning. The 2,000 lb GVWR handles the total weight of narrow-beam boats in the 18-foot class with motor, fuel, and gear. The galvanized frame provides complete saltwater and brackish water corrosion resistance through years of frequent launches at Lake Pontchartrain, the coastal ramps, and every put-in across the Greater New Orleans West Bank. Whether you're Fishing Fanatic Frank matching a trailer to his narrow jon boat, a pirogue owner who needs the narrow bunk spacing, New Boater Nancy and Nick ensuring proper hull support for their narrow 18-foot aluminum boat, or any narrow-beam boat owner tired of the hull sitting wrong on a too-wide trailer, this CD18N is engineered for your hull.

At $1,532.79, the Magic Tilt CD18N-2000 provides the narrow-beam specific configuration that standard-width trailers can't match. Magic Tilt has been building boat trailers since 1953, and the CD18N addresses the specific hull support requirements of narrow-beam boats. The galvanized construction holds resale value and eliminates rust maintenance. Verify your boat's beam width confirms the narrow configuration is the correct fit. Perfect for jon boats, pirogues, narrow V-hulls, narrow aluminum fishing boats, and any slim-profile hull up to 18 feet throughout Greater New Orleans, the West Bank, and the Gulf Coast corridor.

Key Features:
- Magic Tilt CD18N-2000 galvanized single axle — narrow-beam configuration
- Designed specifically for narrow-beam boats up to 18 feet
- 2,000 lb GVWR for lighter narrow-beam hulls
- Bunk spacing set closer together for proper narrow hull support
- Hot-dipped galvanized steel frame for saltwater corrosion resistance
- B78x13C tires on 13-inch wheels
- Prevents pressure points from too-wide bunk spacing
- Distributes hull weight evenly across bunk surface
- Proper hull contact protects gel coat and aluminum finish
- Compact single axle — lightweight and easy to maneuver
- Winch post with strap for secure bow tie-down
- Built by Magic Tilt Trailers — manufacturing since 1953
- Same-day pickup available in Westwego, LA

Magic Tilt CD18N narrow-beam galvanized trailer for Southeast Louisiana slim-profile boats up to 18 feet. Available for same-day pickup in Westwego, LA.