UFP Bearing Kit 1-3/8x1-1/16" M

The UFP Bearing Kit 1-3/8x1-1/16" M is a marine-grade wheel bearing kit featuring 1-3/8 inch inner and 1-1/16 inch outer bearings, the most common bearing combination for boat trailer axles in the 2,000 to 3,500 lb range used throughout Southeast Louisiana. This UFP kit includes the inner bearing, outer bearing, grease seal, and hardware needed to repack or replace the bearings in your trailer hubs — the single most important maintenance item on any trailer that gets submerged at the boat launches across Bayou Segnette State Park, Lake Pontchartrain, and the dozens of saltwater and brackish water ramps throughout Jefferson Parish and the Greater New Orleans West Bank. The marine-grade designation means these bearings are built for the water exposure and corrosive conditions that Louisiana boat trailers face at every single launch.

Louisiana boaters who launch regularly know that hub bearings are the first thing to fail on a neglected trailer. Every time your hubs go underwater at a ramp, the temperature shock draws water past the seals and into the bearing cavity where it contaminates the grease and starts corroding the bearing rollers. The UFP 1-3/8x1-1/16 bearing combination fits the majority of single axle boat trailers hauling bass boats, bay boats, jon boats, and small center consoles from Westwego and Marrero through Harvey, Gretna, and across the West Bank. Whether you're Fishing Fanatic Frank doing a pre-season bearing repack to keep his trailer rolling smooth, New Boater Nancy and Nick replacing grinding bearings they noticed on the drive home from the launch, Captain Chris maintaining fleet trailer hubs on a preventive schedule, or a marine repair shop stocking the most common bearing kit size for quick turnaround service, this UFP kit covers the job.

At $24.99, this UFP bearing kit is affordable preventive maintenance that protects your hub, spindle, and axle from the catastrophic damage that bearing failure causes. A seized bearing generates extreme heat that can destroy the hub, warp the spindle, and leave you on the shoulder of Interstate 10 or Highway 90 with a wheel that won't turn. The 1-3/8x1-1/16 size is the industry standard for light to medium boat trailers, and keeping a spare kit in your garage means a bearing issue never cancels a fishing trip. Perfect for bearing repacks, hub rebuilds, preventive maintenance, and emergency bearing replacements on boat trailers throughout Southeast Louisiana and the Gulf Coast region.

Key Features:
- UFP marine-grade bearing kit with 1-3/8" inner and 1-1/16" outer bearings
- Most common bearing size for 2,000 to 3,500 lb boat trailer axles
- Marine-grade construction built for saltwater and water submersion conditions
- Includes inner bearing, outer bearing, grease seal, and hardware
- Essential maintenance kit for trailers that get submerged at boat ramps
- Prevents catastrophic hub and spindle damage from bearing failure
- Fits the majority of single axle boat trailers in Southeast Louisiana
- Affordable preventive maintenance that protects expensive hub components
- Compatible with Magic Tilt and aftermarket boat trailer hubs
- Keep a spare on hand — never cancel a trip over a bearing issue
- Ideal for seasonal repacks, hub rebuilds, and emergency replacements
- Suitable for DIY trailer owners, marine repair shops, and fleet maintenance
- Same-day pickup available in Westwego, LA

UFP marine bearing kit for Southeast Louisiana boat trailer hub maintenance. Available for same-day pickup in Westwego, LA.