Single axle boat trailer fender step assembly left side 8-inch step

Undercarriage 38" 8" 13" LH

$112.99
Skip to product information
Single axle boat trailer fender step assembly left side 8-inch step

Undercarriage 38" 8" 13" LH

$112.99

The Undercarriage 38" 8" 13" LH is a Magic Tilt single axle undercarriage fender step assembly measuring 38 inches wide with 8-inch step platforms, designed for 13-inch tires, left-hand side only, available at Skipper B Trailers in Westwego, Louisiana. This is the narrow-step version of the 38-inch undercarriage for the left-hand (driver side) of Magic Tilt single axle boat trailers running 13-inch wheels. The 8-inch step platform is the narrower configuration used on Magic Tilt trailers with tighter frame spacing, narrower beam boats, or setups where the wider 12-inch step would interfere with hull clearance or bunk positioning. The left-hand designation means this piece is specifically shaped for the driver side of the trailer — it is not interchangeable with the right-hand version.

Louisiana boat trailer owners replacing undercarriage fender steps must match the original step width to maintain proper hull clearance. Installing a 12-inch step where an 8-inch belongs can contact the boat hull during transport, prevent the boat from sitting at the correct position on the bunks, or create rubbing that damages the hull finish over hundreds of miles on Interstate 10, Highway 90, the Westbank Expressway, and the parish roads between Westwego, Marrero, Harvey, and Gretna. The 8-inch step provides a usable stepping surface for accessing the driver side of the trailer at the launches across Bayou Segnette State Park, Lake Pontchartrain, and the ramps throughout Jefferson Parish and the Greater New Orleans West Bank. The driver side is where most operators stand when connecting the winch strap and checking the bow tie-down, so even the narrower step gets heavy foot traffic at every launch. The fender coverage keeps road spray from the left-side tire off the boat hull during highway towing. Whether you're Fishing Fanatic Frank replacing a corroded left-side narrow-step undercarriage, a marine repair shop matching the original 8-inch configuration on a customer's Magic Tilt, or buying both the LH and matching RH (Inventory 946) for a complete narrow-step undercarriage replacement, this LH assembly covers the driver side.

At $112.99, this left-hand narrow-step undercarriage provides the correct 8-inch step replacement for Magic Tilt trailers that spec the narrower platform. Pair with the matching RH (Inventory 946) for a complete set. Measure your existing step width before ordering — the 8-inch and 12-inch steps are not interchangeable. This is the LEFT HAND (driver side) only. Confirm tire size is 13 inches. Perfect for OEM-matching undercarriage replacements, single-side repairs, paired replacements, and Magic Tilt single axle service throughout Southeast Louisiana.

Key Features:
- Magic Tilt single axle undercarriage fender step — LEFT HAND only
- 38-inch overall width for single axle trailer frame
- 8-inch step platforms — narrower configuration for tighter clearances
- Designed for 13-inch tire clearance
- Left-hand (driver side) specific — not interchangeable with right
- Narrower step maintains proper hull clearance on tight configurations
- Not interchangeable with 12-inch step versions — measure before ordering
- Driver side — where operator typically stands during loading
- Fender coverage keeps road spray off boat hull
- Bolt-on installation to Magic Tilt single axle frames
- Replaces bent, corroded, or damaged left-side undercarriages
- Pair with RH (Inventory 946) for complete replacement
- Same-day pickup available in Westwego, LA

Magic Tilt left-hand 8-inch step undercarriage for Southeast Louisiana single axle boat trailers. Available for same-day pickup in Westwego, LA.

You may also like