X-Arm Bracket Adj., 8", Galv*

The X-Arm Bracket Adj., 8", Galv is an 8-inch galvanized adjustable cross-arm bracket for Magic Tilt boat trailers, designed to mount on trailer crossmembers and extend outward to position bunk boards at the correct width for your boat's hull, available at Skipper B Trailers in Westwego, Louisiana. The X-arm bracket is what sets the bunk spacing on your trailer — it determines how wide apart the bunks sit and how they contact the hull during loading, transport, and launching. The adjustable design lets you fine-tune the outward position to match your specific boat's beam and hull shape, ensuring the bunks support the hull correctly as you tow on Interstate 10, Highway 90, the Westbank Expressway, and through every crowded launch parking lot between Westwego, Marrero, and the boat ramps across Jefferson Parish and Greater New Orleans. The galvanized finish matches the corrosion protection of your galvanized Magic Tilt frame.

Louisiana boaters who've changed boats, adjusted bunk positions, or replaced corroded brackets understand that the X-arm is the critical link between the trailer frame and the bunk board that actually touches the hull. If the X-arm is corroded and weakened, the bunk drops or shifts under the weight of the boat. If the X-arm isn't adjustable, you're stuck with fixed bunk spacing that may not fit your hull correctly — too narrow and the hull sits high and unstable, too wide and the bunks don't contact the hull where they should. The adjustable hole positions on this 8-inch X-arm let you dial in the exact spacing your boat needs for solid, centered support. Whether you're Fishing Fanatic Frank replacing a rusted X-arm bracket after years of saltwater launches at Bayou Segnette State Park, a marine repair shop adjusting bunk width for a customer who put a new boat on an existing trailer in Harvey or Gretna, or New Boater Nancy and Nick setting up a used Magic Tilt to properly fit their first boat, this galvanized X-arm delivers the adjustability and corrosion resistance the job demands.

At $20.25, this galvanized X-arm bracket is an essential suspension and support component for any Magic Tilt trailer that needs bunk width adjustment or bracket replacement. The 8-inch length provides the extension range needed for standard boat widths on mid-size Magic Tilt configurations. Replace any X-arm that's corroded, bent, cracked, or no longer holding position. Perfect for bunk width adjustments, bracket replacements, new boat fitting, trailer rebuilds, and marine repair shop service throughout Southeast Louisiana.

Key Features:
- 8-inch galvanized adjustable X-arm bracket for Magic Tilt boat trailers
- Mounts to trailer crossmembers and extends outward to position bunks
- Adjustable width positioning through multiple bolt hole locations
- Sets bunk spacing to match your boat's beam and hull shape
- Galvanized finish matches Magic Tilt galvanized trailer frames
- Resists saltwater corrosion and humid Gulf Coast conditions
- 8-inch extension covers standard bunk width range on mid-size trailers
- Replaces corroded, bent, or worn original X-arm brackets
- Fine-tune bunk contact for proper hull support during transport
- Critical for correct bunk alignment after changing boats
- Compatible with Magic Tilt and aftermarket galvanized configurations
- Ideal for DIY trailer owners, marine repair shops, and fleet maintenance
- Same-day pickup available in Westwego, LA

Galvanized adjustable X-arm bracket for Southeast Louisiana Magic Tilt boat trailers. Available for same-day pickup in Westwego, LA.